CML

SCA (R)

Categories: , ,
CML_275x0

Technical Specifications

The SCA models are the heaviest and strongest machines from CML. These machines can effortlessly deliver heavy work across 3 shifts. The CML SCA multi-blade saws are used at timber merchants and sawmills, as well as  for the production of crates/pallets etc.

The SCA models are built to a very high quality standard for a long service life. The frame is made from thick steel plate. The saw shafts are produced in-house at CML from a very high-quality grade of steel.

 

The system for adjusting the height of the saw shaft is unique.

The CML SCA comes in various cutting widths, between 220 and 650 mm. The maximum distance between the 2 outermost saws is SCA 250  = 220 mm / SCA 320 = 320 mm / SCA 450 = 450 mm / SCA 650/ 700 = 650 mm.

 

The CML SCA models are available as MULTIRIP and as EDGER. The MULTIRIP is a machine with a fixed saw shaft where the maximum distance between the 2 outermost saws is:

  • 220 mm on the SCA 250
  • 320 mm on the SCA 320
  • 450 mm on the SCA 450 and
  • 650 mm on the SCA 650/700

    

Several saws can be placed on the fixed saw shaft, where you can choose the spacing thanks to intermediate rings. There are also saw bushes that can be quickly exchanged. When you have several saw bushes, you can quickly exchange the whole saw bush to switch  to a different cutting pattern.

 

The maximum cutting thickness is 110 mm for the SCA 250, 130 mm for the SCA 320 and 150 mm for the SCA 450 & SCA 650/700. The maximum saw diameter of the SCA 250  is 330 mm / SCA 320 = 370 mm / SCA 450 & SCA 650-700 = 450 mm. Depending on the model and the type of work you can choose between motors ranging from 20 to 125 HP. On the general info about CML multi-blade saws you can find out how much HP is needed for which type of work.

 

The feed chain of the SCA models is exceptionally strong. Each chain slat can be individually detached from the chain. The width of the chain varies from 250 mm for the SCA 250 to 700 mm for the SCA 650/700 model. You can fit the chain with different types of top slats. This ensures trouble-free feeding of the wood. At the sawing group the chain track lowers a few mm so that the saws cannot touch the feed chain. The maximum wood feed width is always greater than the chain width:

  • On the SCA 250 = 680 mm
  • On the SCA 320  = 800 mm
  • On the SCA 450 = 930 mm
  • On the SCA 650/700 = 1130 mm

 

To fully cut these wide workpieces, the machine can be fitted with a return system for the 2nd pass along the saw shaft.

 

The EDGER models have an R in the type designation. The EDGER R are sawing machines with 1 fixed saw on the right and 1 mobile saw for the SCA 250 R model, up to 2 mobile saws for the SCA 320 and up to 4 mobile saws for the SCA 450 R & SCA RT 700.

You can set the mobile saws separately to size for each workpiece to achieve the most efficient cutting pattern. On the right side there is 1 fixed saw blade, but here you can also place several saw blades side by side. On the fixed saw blade and the mobile saws there is a laser showing where the cut will be made. This allows you to position the wood perfectly at the infeed side to be taken up by the infeed chain. There are several ways to set the mobile saws to the desired size.

 

When you want to saw out cracks, knots or bark, you can position the saws easily and quickly with the joysticks and lasers. The joysticks are also equipped with various selector switches that activate the computer program for the many different programs and work choices.

 

SCA MULTI-BLADE SAWS with double saw shaft. This is unique!

These machines are fitted with 2 saw shafts and 2 feed chains. On these models the lower and upper saw shafts are slightly offset from each other. This way the saws on the upper and lower saw shafts cannot touch each other, while still cutting the full thickness of the workpiece without issue.  

 

These machines handle the heaviest work and weigh between 7 and 10 tonnes.

The SCA 350ST 350, SCA 400 BT 500, SCA 400 B, SCA 400 BO, SCA 500 B and SCA 500 BO models are all fitted with a double saw shaft. They have a saw shaft at the bottom and an additional saw shaft at the top. Thanks to this design you can cut solid wood up to 270 mm thick + you can fit 2 motors of up to 180 HP. This allows you to increase the feed rate and work faster. The machine is also capable of cutting very thick workpieces with many saw blades (see general info CML: HP required per cm of wood thickness). The SCA 400 B/O and SCA 500 B/O go one step further. These are machines where, among other things, the feed chain is hydraulically driven, which makes them even more powerful.

They feature a drive of 30 kW or 50 HP.

What makes this machine unique?

%title%

%unique_points_description%

All product images

Ready to

Take the next step?

Request a quote



















Our top 3 machines in this sector

More than just machines: a full-service solution

Buying or renting a machine is one thing. What comes next is what makes the difference.
At Rogiers, you’re never on your own. From installation to long-term maintenance, our service team ensures that your production keeps running—without any surprises.

Found the right machine for you?

Now is the time to take the next step. Whether you have questions, want to schedule a
demo, or would like a quote right away, we’re here to help.